|
 |
|
| Click to enlarge image(s) |
Recently Upgraded to 36X Ex-View HAD CCD!!
This is one of our most sought after cameras; recently upgraded for minimal costs! This highly effective exterior PTZ camera has been used by the US military on their scouting and observation vehicles.
It's rugged design will allow you to operate this unit in the worst of atmospheres, with its super "SHOCK-ability" and versatility, just connect it to your vehicles power supply, connect a joystick controller and view it all on a monitor. A perfect professional mobile application for observation and (LAV) Light Armored Vehicles.
This camera can also be used for Safari Vehicles, allowing you to get up close and personal with the wildlife. The camera could be used for observation, studying, or tourist attraction day or night.
The 12V version of this camera can be connected directly to the vehciles power supply without the use of an inverter
Want to record comprehensive video for future use, then use our high end high quality Firmus Lite Professional grade Embedded Mobile H.264 DVR or our Firmus Boxers-S Professional grade PC based H.264 Mobile DVR to provide crystal clear DVD quality video! Video connection is simple by connecting the video from the camera to the DVR then run the cable to your monitor.
Features
IR LEDs range up to 80m (262.5')
Weatherproof Design, High die cast Aluminum Casing
Super Shockproof especially for vehicle mounted surveillance
360 deg Pan rotation and 180 deg Tilt rotation
128 presets
Specifications:
Image Sensor: 1/4" Sony EX-View CCD
Active Pixels: 752H x 582V
Synchronization: Internal
Video Output: VBS 1.0Vp-p /75 ohms
White Balance: Auto/Manual
Scanning Frequency: 60Hz (V)
Resolution: More than 480 Lines
S/N Ratio: More than 50dB
Electronic Shutter: 1/3~1/10000s
Lux: 0.01 Lux
Focal & Iris: Auto & Manual
Lens Focal Length: 3.4~122mm - F1.6 to F3.8 - Sony FCB-EX1000 module
- Wide Dynamic Upgrade: Wide Dynamic - SONY EX-VIEW 530 TVL, 36X - Sony FCB-EX1010 module
- Please note: The CD56NV-IR in "PAL Format" is only available in (WDR) Wide Dynamic Range
Zoom: 420x total (36X Optical, 12X Digital)
Minimum working distance: 320mm (Wide end) to 1800mm (Tele end)
Iris/Zoom: Auto / Manual
Tilt Speed: 0~40 deg/s
Pan Speed: 0~80 deg/s
Pan Rotation: 360° continuous
Tilt Rotation: 360° with stop at bottom middle
Wind Load rating: 90 Mph
Preset: 128
Patrol Function: 6 Patrol Patterns
Scanning Speed: 0.5 ~ 30 deg/s
IR Illuminators pivot with camera to give you the IR beam where the camera is pointing
Infrared Illuminator: High Bright 40pcs LED IR
IR Wavelength: 850 nm
IR Project Distance: 80 m (262.5 ft)
IR Power Consumption: 1.6 W
Presets: 128 presets , 6 Tracks
Communication: Multiprotocol, Pelco D, Pelco P, Samsung etc., Baud rate from 2400Bps to 19200bps for optional RS485 control
Control of Infrared Lamp: Auto/Manual control on menu
Service Life of Infrared Lamp: Over 20000 hours
Alarm Four Channel Inputs: Normal Open, closing for alarm
Alarm One Channel Output: Normal Open, Normal Close Output
Power Supply: AC24V +/- 10%
Power Consumption: 30VA
- During day time, sitting Idle - 24V30VA (2.0 Amps)
- During day time, being used...Pan / Tilt / zoom - 24V35VA (2.75 Amps)
- During night time, sitting idle - 24V30VA (2.0 Amps)
- With IR on - 24V30VA (3.0 Amps)
- During night time, being used...Pan / Tilt / zoom - 24V35VA (2.75 Amps)
- With IR on - 24V30VA (3.0 Amps)
Weight: 6Kg (13 lbs)
Installation Style: Normal Open, closing for alarm
Alarm One Channel Output: Plain Base Installation/Vehicle-Carried
Relative Humidity: 10-90%
Operation Temperature: -35C ~ +55C
Ingress Protection: IP66
Wind Load rating: 90 Mph
Wall Mount Bracket Included, optional shock mount base
The CD56NV-IR camera is ready to go right out of the box and is set to Pelco D protocol, more information is listed below for setting up and changing the CD56NV-IR's protocol and baud rate. If you do not have a compatible controller or a controlling device which does not have a "Call preset Function" button, you will not be able to set up the CD56NV-IR's functions from the main menu of the camera, if this is the case please use our joystick controller for correct operation of the CD56NV-IR.
Click here for the CD56NV-IR users manual
Click here for the PTZ SW1 and SW2 Protocol and Baud rate switch set up. For more information please see your DVR manual and Operation Manual for your specific High Speed Dome Camera settings. Please read your operation manual carefully before installing and using the unit, failure to do so will cause the camera to malfunction.
Have a PC with DVR cards and need a RS485-232 converter Click here
Has the IR on your CD56NV-IR been damaged or burnt out? Click here for the replacement IR lamp
CD56NV-IR includes everything as shown above, also includes wall mount, not shown.
(shock mount base optional and recommended for vehicle mount applications)
Currently being used by the Shreveport Fire Department Bomb Squad
TEST DRIVE the CD56NV-IR 36x Optical zoom, 530TVL Wide Dynamic Range CCTV PTZ camera.
Click here to download a short video of our CD56NV-IR 36x Optical Zoom, 530TVL Wide Dynamic Range CCTV PTZ camera connected to our NOVO Mini H.264 IP encoder. The CD56NV-IR PTZ camera is situated on top of a 120’ climbable tower overlooking Warren, Michigan USA and is connected to our H.264 NOVO Mini IP encoder, recorded at CIF (352 x 240) resolution at 30 fps @ 512KBps over a remote wireless connection and controlled and recorded with our Concert NVR Client Software. This includes our proprietary file player software to play the video clip and short users guide (No software to install).
You will get the same operation and zoom capabilities with our ASH56NV-IR PTZ and our ASH56NV-IR-L PTZ models.
Quick Q & A
Q. I am getting a 40 VA power reading from the video ouput from the CD56NV-IR, what is going on and how do I stop this from happening?
A. This is common on vehicular mounted applications when the shockmount base is not used, the camera is grounding out on the vehicle, please order the shockmount base and this will solve the issue.
Q. Do I need the shockmount base?
A. It is higly recommend that you use the shockmount base on vehicular appllications, the shockmount base serves 2 purposes, the first is it stops the vibration from the vehicle entering into the camera and secondly it stops the camera from being grounded on the vehicle, the shockmount base will extend the life of the CD56NV-IR PTZ camera considerably.
Q. Do you have a IR replacement board for the CD56NV-IR PTZ camera?
A. Yes, see you may purchase one with the camera when ordering or you may purchase the CD56NV-IR replacement IR LEDs here
Q. The glass on my CD56NV-IR PTZ is scratched, do you have a replacment glass?
A. Yes, you may purchase one with the camera when ordering or you may purchase the CD56NV-IR replacement glass here
► Write a review
|
Note: All prices in US Dollars
|
