|
 |
|
| Click to enlarge image(s) |
Recently Upgraded to 36X Ex-View HAD CCD!! New LOWER price !!
Specifications:
Optical Technology Base: High Resolution Color Day/Night Sony 1/4" EX-View HAD CCD
Module: Sony FCB-EX1000
IR Cut Filter: Mechanical
Effective Picture Elements: Approx. 380,000 pixels
Picture Elements (Horz x Vert in mm): EIA/NTSC: 768H x 494V - CCIR/PAL: 752H x 582V
Minimum Illumination: 0.01 Lux
Viewing Capability in dark: 150 - 200ft clearly
S/N Ratio: >50 dB
Electronic shutter: 1/1 to 1/10,000s steps
Lens: 36x optical zoom, 3.4mm~122mm, F1.6 to F4.5
- Wide Dynamic Upgrade: Wide Dynamic - SONY EX-VIEW 530 TVL - Sony FCB-EX1010 module
- Please note: The CD55NV36S in "PAL Format" is only available in (WDR) Wide Dynamic Range
Zoom: 420x total (36X Optical, 12X Digital)
Viewing Angle (H): 53.2 deg (Wide end) to 2.2 deg (Tele end)
Minimum working distance: 320mm (Wide end) to 1800mm (Tele end)
Sync system: Internal/External (V-Lock)
White balance: Auto, ATW, Indoor, Outdoor, One-push, Manual
Gain: Auto/Manual (-3 to 28 dB, 2 dB steps)
AE control: Auto, Manual, Priority mode, Bright, EV compensation, Back-light compensation EV compensation: -10.5 to +10.5 dB (1.5 dB steps)
Back-light compensation: On/Off
Privacy zone masking: On/Off (24 positions)
Flicker cancel: Auto
Focusing system: Auto (sensitivity: normal, low), One-push AF, Manual, Infinity, Interval AF, Zoom Trigger AF
Pan Speed: 0~300 deg /sec
Tilt Speed: 0~120 deg /sec
Pan Range: 360 deg continuously
Tilt Range: 90 deg (180 deg w/ auto flip)
Ingress Protection (Anti-corrosion rating): IP66
Preset: 128 presets
White Balance / Gain / AE Control: Auto / Manual
Video Output: 1V p-p, 75 ohms
Communication: Multiprotocol, RS485
Power Supply: AC24V +/- 1.50 (Included)
Weight: 2 Kg / 4 lbs
Operating Temperature: -35C to +55C (w/ Housing)
Power Consumption: 20VA
- Motor Running: 600mA
- Standby: 370mA
- Fan Running: 450mA
- Heater on: 180mA
Click here for the CD55NV36S Series Installation and Users manual
Click here for the PTZ Daisy chain / Direct run connection diagram
Click here for our PTZ address Calculator
The CD55NV36S camera is ready to go right out of the box and is set to Pelco D protocol 2400 baud, more information is listed below for setting up and changing the CD55NV36S's protocol and baud rate. If you do not have a compatible controller or a controlling device which does not have a "Call preset Function" button, you will not be able to set up the CD55NV36S functions from the main menu of the camera, if this is the case please use our joystick controller for correct operation of the CD55NV36S.
Click here for the PTZ SW1 and SW2 Protocol and Baud rate switch set up. For more information please see your DVR manual and Operation Manual for your specific High Speed Dome Camera settings. Please read your operation manual carefully before installing and using the unit, failure to do so will cause the camera to malfunction.
Need a R2485-232 converter Click here
Please note: When ordering PAL or WDR options please give us a quick call at 1.877.843.3921 or 1.403.668.4758, to verify stock and availability, PAL format is currently only available in (WDR) Wide Dynamic Range.
► Write a review
|
Note: All prices in US Dollars
|
